A new generation of PLA for the C64 is now available.

Disk drives, Monitors, SuperCPU etc.
polbit
Member
Member
Posts: 1
Joined: Sun Jan 08, 2017 1:54 pm

Re: A new generation of PLA for the C64 is now available.

Post by polbit » Sun Jan 08, 2017 1:56 pm

I'm interested in 2, in US. Please let me know how I can order!

Thanks



User avatar
eslapion
Member
Member
Posts: 662
Joined: Mon Jul 20, 2015 10:11 am
Location: Canada

Re: A new generation of PLA for the C64 is now available.

Post by eslapion » Sun Jan 08, 2017 7:34 pm

Sending PM!
Wealth, like happiness, is never attained directly. It comes as a by-product of providing a useful service. -Harland D. Sanders

Zekt64
Member
Member
Posts: 1
Joined: Tue Jan 10, 2017 7:34 am

Re: A new generation of PLA for the C64 is now available.

Post by Zekt64 » Tue Jan 10, 2017 7:38 am

I'm interested in one in the US, please let me know how I can order!

User avatar
eslapion
Member
Member
Posts: 662
Joined: Mon Jul 20, 2015 10:11 am
Location: Canada

Re: A new generation of PLA for the C64 is now available.

Post by eslapion » Wed Jan 11, 2017 5:25 am

Sending PM!
Wealth, like happiness, is never attained directly. It comes as a by-product of providing a useful service. -Harland D. Sanders

Mike_L0mbard0
Member
Member
Posts: 1
Joined: Wed Jan 18, 2017 6:39 am

Re: A new generation of PLA for the C64 is now available.

Post by Mike_L0mbard0 » Wed Jan 18, 2017 6:41 am

Hi! I am interested in 2 possibly 3 of these, Please let me know how I can order!

Thanks
Mike

Ozfer
Member
Member
Posts: 1
Joined: Sat Dec 24, 2016 8:01 pm

Re: A new generation of PLA for the C64 is now available.

Post by Ozfer » Wed Jan 18, 2017 9:05 pm

Still interested in ordering 1! Please PM me.

User avatar
eslapion
Member
Member
Posts: 662
Joined: Mon Jul 20, 2015 10:11 am
Location: Canada

Re: A new generation of PLA for the C64 is now available.

Post by eslapion » Fri Jan 20, 2017 10:00 pm

PMs sent to Ozfer and Mike.

Country of destination is not specified so I assume you guys are located in the US. If not then the cost of shipping will have to be recalculated.
Wealth, like happiness, is never attained directly. It comes as a by-product of providing a useful service. -Harland D. Sanders

User avatar
eslapion
Member
Member
Posts: 662
Joined: Mon Jul 20, 2015 10:11 am
Location: Canada

Re: A new generation of PLA for the C64 is now available.

Post by eslapion » Sun Feb 12, 2017 2:38 pm

4th batch sold out, a 5th batch is in preparation

700 units sold!
Wealth, like happiness, is never attained directly. It comes as a by-product of providing a useful service. -Harland D. Sanders

dschwen
Member
Member
Posts: 1
Joined: Sun Jan 29, 2017 2:43 am

Re: A new generation of PLA for the C64 is now available.

Post by dschwen » Sun Feb 12, 2017 5:58 pm

Hey all, do you guys have any recommendation where to get IC sockets in the US (in particular the 28 pin DIL that fits the PLA)?

User avatar
eslapion
Member
Member
Posts: 662
Joined: Mon Jul 20, 2015 10:11 am
Location: Canada

Re: A new generation of PLA for the C64 is now available.

Post by eslapion » Sun Feb 12, 2017 8:42 pm

dschwen wrote:
Sun Feb 12, 2017 5:58 pm
Hey all, do you guys have any recommendation where to get IC sockets in the US (in particular the 28 pin DIL that fits the PLA)?
For one thing, I don't recommend using machined pins sockets - they usually will not accept 24mil pins.

The best ones are called dual or double leaf sockets and I used to buy Diplomat DL for SID and PLA sockets. I can't find them anymore at Digikey.

Mouser presently sells 3M dual leaf sockets of the 4800 series. They seem the closest equivalent I can find to the defunct Diplomat DLs.

See products 4828-6004-CP and 4828-6000-CP
Wealth, like happiness, is never attained directly. It comes as a by-product of providing a useful service. -Harland D. Sanders

Post Reply Previous topicNext topic

Who is online

Users browsing this forum: No registered users and 1 guest