Behr-Bonz multicart for VIC-20

Moderator: eslapion

User avatar
eslapion
Active Member
Active Member
Posts: 1215
Joined: Mon Jul 20, 2015 10:11 am
Location: Canada
Contact:

Re: Behr-Bonz multicart for VIC-20

Post by eslapion »

A new batch of gold plated PCBs has been received and the Behr-Bonz is available and in stock! The price remains unchanged!


Wealth, like happiness, is never attained directly. It comes as a by-product of providing a useful service. -Harland D. Sanders
User avatar
eslapion
Active Member
Active Member
Posts: 1215
Joined: Mon Jul 20, 2015 10:11 am
Location: Canada
Contact:

Re: Behr-Bonz multicart for VIC-20

Post by eslapion »

I am out of stock but SnakeGrunger has about half a dozen left and announced them on Denial and Amibay.
Wealth, like happiness, is never attained directly. It comes as a by-product of providing a useful service. -Harland D. Sanders
rmzalbar
Member
Member
Posts: 257
Joined: Wed May 08, 2019 9:06 am
Contact:

Re: Behr-Bonz multicart for VIC-20

Post by rmzalbar »

Any sources of Behr-Bonz available?
Smooth operator
User avatar
eslapion
Active Member
Active Member
Posts: 1215
Joined: Mon Jul 20, 2015 10:11 am
Location: Canada
Contact:

Re: Behr-Bonz multicart for VIC-20

Post by eslapion »

rmzalbar wrote: Sun Feb 16, 2020 7:35 am Any sources of Behr-Bonz available?
I sent you a PM and it is still sitting in my outbox.
Wealth, like happiness, is never attained directly. It comes as a by-product of providing a useful service. -Harland D. Sanders
User avatar
eslapion
Active Member
Active Member
Posts: 1215
Joined: Mon Jul 20, 2015 10:11 am
Location: Canada
Contact:

Re: Behr-Bonz multicart for VIC-20

Post by eslapion »

Everyone please know that I have Behr-Bonz carts in stock and the new design is all surface mount except for the large EPROM.
Wealth, like happiness, is never attained directly. It comes as a by-product of providing a useful service. -Harland D. Sanders
User avatar
eslapion
Active Member
Active Member
Posts: 1215
Joined: Mon Jul 20, 2015 10:11 am
Location: Canada
Contact:

Re: Behr-Bonz multicart for VIC-20

Post by eslapion »

The new Behr-Bonz multicart with surface mount components.
Behr-Bonz with surface mount components
Behr-Bonz with surface mount components
Wealth, like happiness, is never attained directly. It comes as a by-product of providing a useful service. -Harland D. Sanders
User avatar
Gyro Gearloose
Member
Member
Posts: 471
Joined: Sun Nov 15, 2015 5:20 am
Contact:

Re: Behr-Bonz multicart for VIC-20

Post by Gyro Gearloose »

Bit of a footprint kerfuffle with SW1, eh?
The price one pays for pursuing any profession, or calling, is an intimate knowledge of its ugly side.
User avatar
eslapion
Active Member
Active Member
Posts: 1215
Joined: Mon Jul 20, 2015 10:11 am
Location: Canada
Contact:

Re: Behr-Bonz multicart for VIC-20

Post by eslapion »

Gyro Gearloose wrote: Mon Jun 22, 2020 2:33 am Bit of a footprint kerfuffle with SW1, eh?
Not at all. Normally I put a pair of wires about 6cm long so the cart can be put in a case and the push-button can be on the back of the case.

However for the photo I wanted the whole thing fit in a rectangle so I just squeezed the pins closer to put the push-button directly on the PCB. You'll note, it's not even soldered there on the photo.
Wealth, like happiness, is never attained directly. It comes as a by-product of providing a useful service. -Harland D. Sanders
User avatar
eslapion
Active Member
Active Member
Posts: 1215
Joined: Mon Jul 20, 2015 10:11 am
Location: Canada
Contact:

Re: Behr-Bonz multicart for VIC-20

Post by eslapion »

A 3D printed white case is now available for 6$US or 5 Euros.
Wealth, like happiness, is never attained directly. It comes as a by-product of providing a useful service. -Harland D. Sanders
nefaurora
Member
Member
Posts: 12
Joined: Wed Aug 02, 2023 9:47 pm
Contact:

Re: Behr-Bonz multicart for VIC-20

Post by nefaurora »

Eslapion,

I was wondering if you could make the Behr-Bonz Vic-20 Cart Labels available so if we wanted to mount the newer surface mount type BEHR-BONZ in an original VIC cart case like you used to do...we would be able to put a nice label on. ;) I obviously don't know who your original cart label supplier was. Much Thanks, Tony K.
Post Reply Previous topicNext topic

Who is online

Users browsing this forum: No registered users and 3 guests