Page 3 of 4
Re: Behr-Bonz multicart for VIC-20
Posted: Mon Sep 17, 2018 11:10 pm
by eslapion
A new batch of gold plated PCBs has been received and the Behr-Bonz is available and in stock! The price remains unchanged!
Re: Behr-Bonz multicart for VIC-20
Posted: Wed Jul 03, 2019 11:11 am
by eslapion
I am out of stock but SnakeGrunger has about half a dozen left and announced them on Denial and Amibay.
Re: Behr-Bonz multicart for VIC-20
Posted: Sun Feb 16, 2020 7:35 am
by rmzalbar
Any sources of Behr-Bonz available?
Re: Behr-Bonz multicart for VIC-20
Posted: Mon Feb 17, 2020 9:30 am
by eslapion
rmzalbar wrote: ↑Sun Feb 16, 2020 7:35 am
Any sources of Behr-Bonz available?
I sent you a PM and it is still sitting in my outbox.
Re: Behr-Bonz multicart for VIC-20
Posted: Sat Jun 13, 2020 2:30 am
by eslapion
Everyone please know that I have Behr-Bonz carts in stock and the new design is all surface mount except for the large EPROM.
Re: Behr-Bonz multicart for VIC-20
Posted: Sat Jun 20, 2020 6:46 am
by eslapion
The new Behr-Bonz multicart with surface mount components.
- Behr-Bonz with surface mount components
Re: Behr-Bonz multicart for VIC-20
Posted: Mon Jun 22, 2020 2:33 am
by Gyro Gearloose
Bit of a footprint kerfuffle with SW1, eh?
Re: Behr-Bonz multicart for VIC-20
Posted: Mon Jun 22, 2020 2:03 pm
by eslapion
Gyro Gearloose wrote: ↑Mon Jun 22, 2020 2:33 am
Bit of a footprint kerfuffle with SW1, eh?
Not at all. Normally I put a pair of wires about 6cm long so the cart can be put in a case and the push-button can be on the back of the case.
However for the photo I wanted the whole thing fit in a rectangle so I just squeezed the pins closer to put the push-button directly on the PCB. You'll note, it's not even soldered there on the photo.
Re: Behr-Bonz multicart for VIC-20
Posted: Sat Nov 28, 2020 8:55 pm
by eslapion
A 3D printed white case is now available for 6$US or 5 Euros.
Re: Behr-Bonz multicart for VIC-20
Posted: Wed Aug 30, 2023 3:01 pm
by nefaurora
Eslapion,
I was wondering if you could make the Behr-Bonz Vic-20 Cart Labels available so if we wanted to mount the newer surface mount type BEHR-BONZ in an original VIC cart case like you used to do...we would be able to put a nice label on.
I obviously don't know who your original cart label supplier was. Much Thanks, Tony K.